Filati Magazine 32, Model 12
Mille sweater and cap
Bingo turn-ups and gloves

Sweater size 36 and 40

Figures in brackets are given for size M. If only one figure is given, it applies to all sizes.

 

Abbreviations:
alt = alternately, ch = chain, col = colour, cont = continue, dc = double crochet, dec = decrease, dtr = double treble, foll = following, gst = garter stitch, htr = half treble, inc = increase, K = knit, mt = meterage, P = purl, patt = pattern, patt g (MS) = pattern group, psso = pass slipped st(s) over, rem = remaining, rep = repeat, rev stst = reversed stocking stitch, P 1 row, K 1 row, Rs = right side, slst = slip stitch, st(s) = stitch(es), stst = stocking stitch, K 1 row, P 1 row, tbl = through back of loop, tog = together, tr = treble, Ws = wrong side, Wwm = when work measures, yo = yarn over needle

Download Knitting TippYou can download instructions and diagrams for private use

Materials: Lana Grossa Qualität "Mille", 50% merino extrafine, 50% acrylic, sweater: approx. 500 (600) g cap: approx. 100 g nature (col 17), 7 mm needles and for the cap 7 mm needles and one 6 mm crochet hook
Rib pattern: K1 P2 alt.
Cable pattern: see diagram. Only right side rows are given. On return rows work sts as set. Rep rows 1 – 10 for pattern. 1 square = 1 st and 2 rows.
Reversed stockinette stitch:   P on right side, K on wrong side.
Gauge: 12 sts and 16 rows to 10 cm or 4“ square (cable pattern with 7 mm needles); 10 sts and 16 rows to 10 cm or 4“ square (rib pattern with 7 mm needles, measured stretched).
Sweater
Front: cast on 51 (65) sts with 7 mm needles and cont in cable pattern: edge st, rep patt g 7 (9) times, edge st. When work measures 33 cm or 13“ from beginning bind off 1 x 3 (4) sts at each end, then on every alt row 2 sts once and 1 st once at each end. When work measures 42 (45) cm or 16 ½ (17 ¾) “ from beginning bind off for V-neck the center st and slip sts of right front onto a length of yarn. Cont over sts of left front, for neck shaping bind off on every alt row 2 sts twice and 1 st 5 times. When work measures 52 (55) cm or 20 ½ (21 ¾) from beginning bind off rem sts. End right front in reverse
Back: work as for front. When work mesures 49 (52) cm or 19 ¼ (20 ½)” from beginning bind off for nech the 9 sts center sts. At neck edge bind off every alt row 3 sts once and 2 sts once. When work measures 52 (55) cm or 20 ½ or 21 ¾“ from beginning bind off rem sts.
Sleeves: cast on 26 (29) sts with 7 mm needles and cont in rib pattern: edge st, K1 * P1 K2, rep from *, P1, K1, edge st. For sleeve shaping inc on 9th row 1 st once at each end, then on every 10th row 1 st twice and on every 8th row 1 st 3 times. When work measures 35 cm or 13 ¾“ from beginning bind off for sleeve top 3 sts once at each end, then on every alt row 1 st 10 times. When work measures 49 cm or 19 ¼” from beginning bind off rem sts. Work 2nd sleeve alike.
Finishing: Block pieces to measurements, cover with a damp cloth and leave to dry. Join seams. For neck band pick up along neck back with 7 mm needles approx. 20 sts and cont in reversed stockinette stitch. Then pick up on every row at the end of row each time another 3 sts 4 times = 44 sts. Work return row alike = at the end of every row bind off 3 sts 4 times. Bind off rem 20 sts. Fold collar half over wrong side and sew on.
Cap
Basic Pattern: number of sts multiple of 4 + edge st. 1st row (= wrong side): P all sts. 2nd row (= right side): edge st, * into foll st work 3 sts (= K1 P1 K1), P3 tog, rep from *, edge st. 3rd row: P all sts. 4th row: edge st, * P3 tog, into foll st work 3 sts (= K1 P1 K1), rep from *, edge st. Rep rows 1 – 4.
Gauge: 13 sts and 16 rows to 10 cm or 4“ square (basic pattern with 7 mm needles).
Cap: start with 1st ear flap. Cast on 10 sts with 7 mm needles and cont in basic pattern, on 3rd row inc 1 st once at each end and inc on 2nd foll row 1 st once at each end = 14 sts. K inc sts. When work measures approx. 9 cm or 3 5/8” from beginning slip sts onto a length of yarn. Work 2nd ear flap alike. For head of cap work as foll, starting at center back: cast on 4 sts, pick up 14 sts of 1st ear flap, cast on 30 sts, then pick up 14 sts of 2nd ear flap, cast on 4 sts = 66 sts. Cont in basic pattern, arrange patt in cont. of ear flaps. When work measures 14 cm or 5 ½” from beginning of cap start dec, P 5 sts tog 3 times evenly across, thus dec 3 patt g. Rep these dec on every 4th round another twice. On 2nd foll round P2 tog each time. Tighten work with the yarn.
Finishing: join back seam. Along lower edge of cap and border of ear flaps crochet 1 round sc and 1 round crab sts (=sc from left to right).
Turn-ups and gloves
Materials: Lana Grossa quality "Bingo", 100% wool merino, turn-ups: approx. 200 g, gloves:100 g nature (col 23), turn-ups: short circular needle or double-pointed needles size 4 mm, gloves: 4.5 and 5 mm double-pointed needles.
Border pattern: alt K2, P2.
Cable: Rows 1-4: stockinette stitch (K on right side, P on wrong side). 5th row: slip 2 on cable needle and leave at front of work, K2, then K2 on cable needle. 6th row: p. Rows 7 and 8: stockinette stitch. Rep rows 1-8 for pattern.
Gauge: 18 sts and 24 rows to 10 cm or 4” square (stockinette stitch with 5 mm needles).
Stockinette stitch: cast on 80 sts with 4 mm needles, join in round and work 4 cm or 1 5/8” in border pattern.Then * K2, P2, 4 sts cable, rep from *. When work measures 26 cm or 10 ¼” from beginning work another 4 cm or 1 5/8” in border pattern. Bind off.
Gloves: cast on 40 sts with 4.5 mm double-pointed needles, join in round and work 7 cm or 2 ¾” in border pattern. Cont with 5 mm needles in stockinette stitch. For thumb gusset work as foll: right glove mark 2nd st on 1st needle, left glove mark 2nd st from end of 4th needle with a length of yarn. On either side of marked sts enlarge gusset sts as foll: Rounds 1 and 2: 1 yo, on next round K1 tbl into yo = 5 gusset sts. Cont as given = on either side of gusset sts work 1 yo. On foll round K1 tbl into yo until there are 11 sts. Slip gusset sts onto a length of yarn and cast on 5 gusset sts, cont. As foll: dec gusset sts: 1st round: K2 tog tbl. K1, K2 tog. 2nd round: K3. 3rd round: K3 tog. Cont straight to level of ring finger. Tip: work slip dec over sts 2 and 3 on needles 2 and 4 (= slip 1 knitwise, K1, pass slipped st over) and K tog sts 3 and 2 from end of needles 1 and 3. Rep these dec on every alt round. At the end tighten rem 8 sts with a length of yarn. Sew yarn off.